光寻址电位传感器的正交相位检波检测方法

光寻址电位传感器的幅度检测方法易受噪声干扰,灵敏度差,信噪比和精度低,且受调制光源的影响较大,影响检测结果的准确性.为此提出了一种基于正交相位检波的光寻址电位传感器检测方法.该方法是将光寻址电位传感器的输出光电流信号分别与两路正交信号相乘,通过低通滤波提取直流分量并相除,即可得到光寻址电位传感器的输出信号相位信息.与已有的光寻址电位传感器相位检测方法相比,该方法具有算法复杂度低、实时性高的优点.实验研究了调制光源光强对光寻址电位传感器幅度检测和相位检测的影响,对比分析了光寻址电位传感器的传统幅度检测方法与正交相位检波检测方法对pH检测的灵敏度、线性度及信噪比.结果表明,相比于幅度检测方法,调制光源光强对光寻址电位传感器的相位检测影响更小,在频率为10 kHz,pH的范围为1.68~10.01的情况下,相位检测方法比幅度检测方法测得的灵敏度增加了7 mV/pH,精度提高了14.9 mpH,非线性误差减小了0.003%,均方差减少了0.1051×10^-5,信噪比增加了8.2827 dB.该方法特别适用于弱光下的光寻址电位传感器检测.     

Free radical oxidation reaction for selectively solvatochromic sensors with dynamic sensing ability

A novel BODIPY (boradiazaindacene) dye denoted as BODIPY-DT containing terpyridine unit has been designed and characterized. The dye is found to be selective and visual solvatochromic sensor toward DMF among test organic solvents. The sensing process displays time-controllable, dynamic signal outputs in the emission colors including red, purple, yellow and even white emission colors. It is presented that selective free radical oxidation reaction happens during the recognition process.     

燃气透平叶片表面颗粒沉积特性数值研究进展

污染物颗粒在燃气透平叶片表面及冷却通道内的沉积将影响透平叶片的冷却特性和安全服役寿命。国外许多研究机构对燃气透平叶片表面污染物颗粒沉积特性及其与叶片气膜冷却的相互作用机制进行了持续研究。本文首次系统总结了近年来燃气透平叶片表面污染物颗粒沉积特性数值研究进展,重点介绍了燃气透平叶栅流道内污染物颗粒的沉积机制、颗粒沉积和脱离物理模型以及颗粒沉积与透平叶片冷却特性相互作用的数值模拟方法和研究成果。基于当前研究热点和发展趋势,结合作者的研究经历,指出了国内在研发先进燃气轮机透平冷却结构时应注意的问题和方向,为高效、燃料适应性更广的燃气轮机技术自主开发奠定基础。     

Bose-like few-fermion systems

It is shown that the specific heat of a few-fermion system with odd number fermions behaves differently from that of a few-fermion system with even number fermions. The specific heat of an even-number-fermion system behaves like a Bose one rather than a Fermi one.     

对感生电场计算方法的探讨

对于感生电场的计算问题,在大学电磁学教材中一般都是利用反证法证明螺线管管内外的E感线都是与螺线管轴线相垂直的同心圆.笔者在此利用解析法和类比法两种方法来证明螺线管管内外的E感线都是与螺线管轴线相垂直的同心圆,并在此基础上计算了E感的大小,以供教学参考.     

phyphox软件介绍及其在物理教学中的应用

全面介绍了基于手机传感器应用的phyphox软件的功能,并对于每种传感器均给出了相应实例来说明并启发其在物理教学中的应用.文章最后尝试总结了phyphox软件的优缺点,并对phyphox在物理教学中的应用前景作了展望和思考,期望对广大物理教师和物理教育研究者提供有益参考.     

强点火作用下C3HF7对甲烷-空气爆炸的抑制

为解决瓦斯输送过程中的爆炸安全问题,探索寻找绿色环保且阻火性能优越的新型抑爆剂,开展了当量比下甲烷-空气预混气体爆炸传播过程中的七氟丙烷抑爆效果研究。实验采用长径比L/D=108的水平管道爆炸特性测试系统,研究了在强点火作用下不同体积分数的七氟丙烷对9.5%甲烷-空气预混气体最大爆炸压力、最大压力上升速率和火焰传播速度的影响。实验结果显示:将2.5 m长的管段作为七氟丙烷抑爆区时,七氟丙烷阻断9.5%甲烷-空气预混气体爆炸火焰传播的最小体积分数为5%;当七氟丙烷的体积分数为1%~4%时,不仅无法阻断爆炸火焰的传播,而且与对照组相比,会使火焰传播速度加快;当七氟丙烷的体积分数为1%~6%时,爆炸源及管道末端处的爆炸压力峰值随着七氟丙烷体积分数的增加而逐渐减小;当七氟丙烷的体积分数为3%时,抑爆区处的爆炸压力峰值与对照组相比增幅为10.9%。     

Tunable electronic and optical properties of SnC/BAs heterostructure by external electric field and vertical strain

Based on the first-principles method, we investigate the electronic structure of SnC/BAs van der Waals (vdW) heterostructure and find that it has an intrinsic type-II band alignment with a direct band gap of 0.22 eV, which favors the separation of photogenerated electron–hole pairs. The band gap can be effectively modulated by applying vertical strain and external electric field, displaying a large alteration of band gap via the strain and experiencing an indirect-to-direct band gap transition. Moreover, the band gap of the heterostructure varies almost linearly with external electric field, and the semiconductor-to-metal transition can be realized in the presence of a strong electric field. The calculated band alignment and the optical absorption reveal that the SnC/BAs heterostructure could present an excellent light-harvesting performance. Our designed heterostructure is expected to have great potential applications in nanoelectronic devices and photovoltaics and optical properties.     

光子晶体光纤温度压力传感器

提出了一种在高温环境下同时测量温度和气压的光子晶体光纤温度压力传感器.在普通单模光纤和光子晶体光纤之间熔接一段空心光纤构成干涉结构.空心光纤段构成非本征法布里-珀罗干涉仪,利用光子晶体光纤的微孔与外界相通,通过气体折射率变化来测量环境中的气压变化;光子晶体光纤段构成本征法布里-珀罗干涉仪,利用热膨胀效应和热光效应来测量环境中的温度.传感器的解调通过自制的白光干涉解调仪实现,实验通过测量腔长得到被测环境的温度和气压.在不同温度和气压环境下,对腔长分别为306μm和1535μm的温度压力光纤传感器进行连续测量.实验结果表明,传感器能够在28~800℃的温度下和0~10 MPa的气压下稳定工作,测量范围内温度灵敏度可达17.4 nm/℃,压力灵敏度随温度增加而降低,在28℃时可达1460.5 nm/MPa.     

Electronic Transitions in Different Redox States of Trinuclear 5,6,11,12,17,18-Hexaazatrinaphthylene-Bridged Titanium Complexes: Spectroelectrochemistry and Quantum Chemistry

Multinuclear transition metal complexes bridged by ligands with extended π-electronic systems show a variety of complex electronic transitions and electron transfer reactions. While a systematic understanding of the photochemistry and electrochemistry has been attained for binuclear complexes, much less is known about trinuclear complexes such as hexaphenyl-5,6,11,12,17,18-hexaazatrinaphthylene-tristitanocene [(Cp₂Ti)₃HATN(Ph)₆]. The voltammogram of [(Cp₂Ti)₃HATN(Ph)₆] shows six oxidation and three reduction waves. Solution spectra of [(Cp₂Ti)₃HATN(Ph)₆] and of the electrochemically formed oxidation products show electronic transitions in the UV, visible and the NIR ranges. Density functional theory (DFT) and linear response time-dependent DFT show that the three formally titanium(II) centers transfer an electron to the HATN ligand in the ground state. The optically excited transitions occur exclusively between ligand-centered orbitals. The charged titanium centers only provide an electrostatic frame to the extended π-electronic system. Complete active self-consistent field (CASSCF) calculation on a structurally simplified model compound, which considers the multi-reference character imposed by the three titanium centers, can provide an interpretation of the experimentally observed temperature-dependent magnetic behavior of the different redox states of the title compound in full consistency with the interpretation of the electronic spectra.